Abstract：Thermal conductivity coefficient, as one of the important physical parameters of rock, is of great significance in geothermal energy development and geotechnical thermal engineering application. The current test method requires the collected rock samples to be processed in the laboratory. The transportation and processing can damage the rock structure and affect the water content. It needs a complex test process, and yields inaccurate results. This study proposes a new test method to obtain the thermal conductivity coefficient of rock on site. The contact surface between rock surface and probe is filled with thermal coupling agent to reduce thermal contact resistance during the test process, and the field thermal conductivity test is carried out with the aid of the thermophysical property tester. The optimal ratio of thermal coupling agent is determined by the comparison experiment of preparing thermal coupling agents by fully mixing different amounts of thermally conductive silicone grease and copper powder. The experiment shows that the application of thermal coupling agent can effectively reduce the thermal contact resistance between probe and rock surface, and improve the test precision. Moreover, the thermal coupling agent itself has little effect on the thermal conductivity coefficient of rock. The research results can provide reference for obtaining thermal conductivity coefficient of rock accurately and conveniently in the field.
江海. 关于岩石导热性野外测定方法的研究[J]. 地质与资源, 2020, 29(3): 282-288.
JIANG Hai. STUDY ON THE FIELD MEASUREMENT METHOD OF ROCK THERMAL CONDUCTIVITY. GEOLOGY AND RESOURCES, 2020, 29(3): 282-288.
Bloomer J R. Thermal conductivities of mudrocks in the United Kingdom[J]. Quarterly Journal of Engineering Geology and Hydrogeology, 1981,14(4):357-362.
[5]
Sundberg J, Back P E, Ericsson L O, et al. Estimation of thermal conductivity and its spatial variability in igneous rocks from in situ density logging[J]. International Journal of Rock Mechanics and Mining Sciences, 2009,46(6):1023-1028.
[6]
Moench A F, Evans D D. Thermal conductivity and diffusivity of soil using a cylindrical heat source[J]. Soil Science Society of America Journal, 1970,34(3):377-381.
[7]
Menberg K, Steger H, Zorn R, et al. Determination of thermal conductivity in the subsurface using laboratory and field experiments and theoretical models[J]. Grundwasser, 2013,18(2):103-116.
[8]
Blázquez C S, Martín A F, Nieto I M, et al. Thermal conductivity map of the Avila region (Spain) based on thermal conductivity measurements of different rock and soil samples[J]. Geothermics, 2017,65:60-71.
[9]
Çanakci H, Demirboğa R, Karakoç M B, et al. Thermal conductivity of limestone from Gaziantep (Turkey)[J]. Building and Environment, 2007,42(4):1777-1782.
[10]
Stylianou I I, Tassou S, Christodoulides P, et al. Measurement and analysis of thermal properties of rocks for the compilation of geothermal maps of Cyprus[J]. Renewable Energy, 2016,88:418-429.
Wang L, Li F P, Su Z T. Effective thermal conductivity behavior of filled vulcanized perfluoromethyl vinyl ether rubber[J]. Journal of Applied Polymer Science, 2008,108(5):2968-2974.
2020, Vol. 29 
辽公网安备 21010502000112号